VDE Spanners
VDE Spanners VDE 2 E
VDE Single Ended Ring Spanner
Deep offset
- GEDORE vanadium steel 31CrV3
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
Width (mm) | Length (mm) | Weight (kg) | Code | No. |
---|---|---|---|---|
8 | 170 | 0.061 | 6035890 | VDE 2 E 8 |
9 | 170 | 0.074 | 6035970 | VDE 2 E 9 |
10 | 170 | 0.097 | 6036000 | VDE 2 E 10 |
11 | 180 | 0.093 | 6036190 | VDE 2 E 11 |
12 | 190 | 0.147 | 6036270 | VDE 2 E 12 |
13 | 190 | 0.130 | 6036350 | VDE 2 E 13 |
14 | 210 | 0.151 | 6036430 | VDE 2 E 14 |
15 | 215 | 0.155 | 6036510 | VDE 2 E 15 |
17 | 220 | 0.199 | 6036780 | VDE 2 E 17 |
19 | 240 | 0.244 | 6036860 | VDE 2 E 19 |
22 | 260 | 0.319 | 6036940 | VDE 2 E 22 |
24 | 280 | 0.446 | 6037080 | VDE 2 E 24 |
27 | 295 | 0.506 | 6037160 | VDE 2 E 27 |
30 | 310 | 0.592 | 6037240 | VDE 2 E 30 |
32 | 330 | 0.683 | 6037320 | VDE 2 E 32 |
VDE 894
VDE Single Open Ended Spanner
- GEDORE vanadium steel 31CrV3
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
- Jaw set at 15 °
Width (mm) | Length (mm) | Weight (kg) | Code | No. |
---|---|---|---|---|
9 | 105 | 0.030 | 6572040 | VDE 894 9 |
10 | 105 | 0.034 | 6572120 | VDE 894 10 |
11 | 115 | 0.044 | 6572200 | VDE 894 11 |
12 | 125 | 0.052 | 6572390 | VDE 894 12 |
13 | 135 | 0.067 | 6572470 | VDE 894 13 |
14 | 145 | 0.081 | 6572550 | VDE 894 14 |
15 | 150 | 0.093 | 6572630 | VDE 894 15 |
16 | 155 | 0.108 | 6572710 | VDE 894 16 |
17 | 160 | 0.117 | 6572980 | VDE 894 17 |
19 | 175 | 0.161 | 6573010 | VDE 894 19 |
22 | 200 | 0.210 | 6573280 | VDE 894 22 |
24 | 220 | 0.268 | 6573360 | VDE 894 24 |
27 | 245 | 0.396 | 6573440 | VDE 894 27 |
30 | 265 | 0.486 | 6573520 | VDE 894 30 |
32 | 280 | 0.558 | 6574920 | VDE 894 32 |
V 60 CP
Adjustable Wrench
Open end, 1000 V
- Chrome-plated
- Dip-insulated
- Individually tested, insulation up to 1000 V
Width (inch) | mm | Weight (kg) | Code | No. |
---|---|---|---|---|
6 | 20 | 0.170 | 2179040 | V 60 CP 6 |
8 | 25 | 0.330 | 2179059 | V 60 CP 8 |
10 | 30 | 0.520 | 2179067 | V 60 CP 10 |
12 | 36 | 0.880 | 2179075 | V 60 CP 12 |
Socket & Accessories
VDE INX 30
VDE Screwdriver Bit Socket 3/8”
For multi-point screws XZN
- With pressed-in pin
- With square drive according to DIN 3120 – C 12.5, ISO 1174
- Bit in GEDORE vanadium special steel, manganese-phosphated
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
M | Code | No. |
---|---|---|
M8 | 2946564 | VDE INX 30 8 |
M10 | 2946572 | VDE INX 30 10 |
M12 | 2946580 | VDE INX 30 12 |
VDE 3093 U
VDE Reversible Ratchet 3/8”
With push-button release
- Robust, with smooth action
- Sockets held absolutely securely by push-button lock with ball in the square drive
- Direction changed by 2 push-buttons, marked R and L, on the shaft
- Return angle 8.2 degrees
- Square drive acc. to DIN 3120 – A 10, ISO 1174, chrome-vanadium steel 31CrV3
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900
a" | a | mm | Weight (kg) | Code | No. |
---|---|---|---|---|---|
3/8 | 10 | 185 | 0.215 | 2946599 | VDE 3093 U |
VDE 19
VDE Socket 1/2″
- Hexagon socket wrench, hand-operated
- With square drive according to DIN 3120 – C 12.5, ISO 1174
- GEDORE vanadium steel 31CrV3
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
- 16 – 18 mm insulation overhang
- Sizes 27, 30 and 32: diameter d1 is not standardised
Width (mm) | d1 | d2 | L | Weight (kg) | Code | No. | |
---|---|---|---|---|---|---|---|
10 | 19.5 | 27 | 54 | 0.070 | 6122510 | VDE 19 10 | |
11 | 20.7 | 27 | 54 | 0.067 | 6122780 | VDE 19 11 | |
12 | 22 | 27 | 54 | 0.070 | 6122860 | VDE 19 12 | |
13 | 23.2 | 27 | 54 | 0.069 | 6122940 | VDE 19 13 | |
14 | 24.5 | 27 | 54 | 0.073 | 6123080 | VDE 19 14 | |
15 | 25.7 | 27 | 55.5 | 0.088 | 6123160 | VDE 19 15 | |
16 | 27 | 27 | 55.5 | 0.086 | 1439294 | VDE 19 16 | |
17 | 28.2 | 27 | 55.5 | 0.084 | 6123240 | VDE 19 17 | |
19 | 30.7 | 27 | 56 | 0.092 | 6123320 | VDE 19 19 | |
22 | 34.5 | 27 | 57.5 | 0.121 | 6123400 | VDE 19 22 | |
24 | 37 | 27 | 57.5 | 0.146 | 6123590 | VDE 19 24 | |
27 | 40.7 | 27 | 57.5 | 0.174 | 6123670 | VDE 19 27 | |
30 | 44.5 | 27 | 59 | 0.212 | 6123750 | VDE 19 30 | |
32 | 47 | 27 | 60.5 | 0.250 | 6123830 | VDE 19 32 |
VDE IN 19
VDE Screwdriver Bit Socket 1/2″
For in-hex screws
- With pressed-in pin
- With square drive according to DIN 3120 – C 12.5, ISO 1174, with ball groove
- Tip GEDORE vanadium special steel
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
- Sockets can only be combined with VDE 1989 T, VDE 1991, VDE 1993 U and VDE 4507
Width (mm) | Length (mm) | Diameter | Weight (kg) | Code | No. |
---|---|---|---|---|---|
5 | 106 | 27 | 0.083 | 6124480 | VDE IN 19 5 |
6 | 106 | 27 | 0.095 | 6124560 | VDE IN 19 6 |
8 | 106 | 27 | 0.109 | 6124640 | VDE IN 19 8 |
VDE 1988-VDE 1989 T VDE T-Handle
For 1/2″ VDE Tools
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation
- VDE 1988 with screw locking, not suited for use with VDE IN 19
- VDE 1989 T with pull locking
inch | mm | mm | Weight (kg) | Code | No. |
---|---|---|---|---|---|
1/2 | 12.5 | 200 | 0.455 | 6124210 | VDE 1988 |
1/2 | 12.5 | 200 | 0.355 | 6124720 | VDE 1989 T |
VDE 1993 U
VDE Reversible Ratchet 1/2″
With push-button release
- Robust, with smooth action
- Sockets held absolutely securely by push-button lock with ball in the square drive
- Direction changed by 2 push-buttons, marked R and L, on the shaft
- Return angle 10 degrees
- Square drive acc. to DIN 3120 – A 12.5, ISO 1174, chrome-vanadium steel 31CrV3
- VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900
inch | mm | mm | Weight (kg) | Code | No. |
---|---|---|---|---|---|
1/2 | 12.5 | 270 | 0.546 | 6123910 | VDE 1993 U |
V 42 T
VDE Hexagon Allen Key with T-Handle
For in-hex screws
- Individually tested, insulation up to 1000 V
- With Check-Tool insulation
- GEDORE chrome-vanadium steel 59CrV4
Width (mm) | Length (mm) | Weight (kg) | Code | No. | ||||
---|---|---|---|---|---|---|---|---|
4 | 160 | 0.145 | 2661225 | V 42 T 4 | ||||
5 | 160 | 0.25 | 2661233 | V 42 T 5 | ||||
6 | 160 | 0.25 | 2661241 | V 42 T 6 | ||||
8 | 160 | 0.26 | 2661268 | V 42 T 8 | ||||
10 | 200 | 0.39 | 2661276 | V 42 T 10 | ||||
11 | 200 | 0.4 | 2661284 | V 42 T 11 | ||||
12 | 200 | 0.42 | 2661292 | V 42 T 12 |
VDE 2172
VDE Screwdriver Slim Drive
For slotted head screws
- Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
- 3-component handles Power-Grip3 with hanging hole
- Ergonomic handle design enables precise and fatigue-free working
- Positive-fit joint of handle and blade for optimum transmission of force
- Type of drive marked at end of the handle
- Ultra-small blade diameter yet with full mechanical and electrical safety
- No problems in reaching screws deeply embedded in screw shafts
- Blade from GEDORE molybdenum-vanadium-Plus tempered steel
Width (mm) | Diameter(mm) | Blade Length (mm) | Length (mm) | Weight (kg) | Code | No. |
---|---|---|---|---|---|---|
3.5 | 0.6 | 100 | 185 | 0.055 | 2824736 | VDE 2172 3,5 |
4 | 0.8 | 100 | 185 | 0.055 | 2824744 | VDE 2172 4 |
5.5 | 1 | 125 | 225 | 0.100 | 2824752 | VDE 2172 5,5 |
6.5 | 1.2 | 150 | 260 | 0.140 | 2824760 | VDE 2172 6,5 |
VDE 2160 PH
VDE Screwdriver
For cross-head screws PH
- Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
- Blade tip to DIN ISO 8764-1 PH
- 3-component handles Power-Grip3 with hanging hole
- Ergonomic handle design enables precise and fatigue-free working
- Positive-fit joint of handle and blade for optimum transmission of force
- Type of drive marked at end of the handle
- Blade from GEDORE molybdenum-vanadium-Plus tempered steel
PH | M | Blade length (mm) | Length (mm) | Weight (mm) | Code | No. |
---|---|---|---|---|---|---|
0 | M1,6 - M2 | 60 | 145 | 0.039 | 1612107 | VDE 2160 PH 0 |
1 | M2 - M3 | 80 | 180 | 0.082 | 1612115 | VDE 2160 PH 1 |
2 | M3,5 - M5 | 100 | 210 | 0.119 | 1612123 | VDE 2160 PH 2 |
3 | M5,5 - M7 | 150 | 270 | 0.188 | 1612131 | VDE 2160 PH 3 |
4 | M8 - M10 | 200 | 320 | 0.269 | 1612158 | VDE 2160 PH 4 |
VDE 2160 PZ
VDE Screwdriver
For cross-head screws Pozi PZ
- Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
- Blade tip to DIN ISO 8764-1 PZ
- 3-component handles Power-Grip3 with hanging hole
- Ergonomic handle design enables precise and fatigue-free working
- Positive-fit joint of handle and blade for optimum transmission of force
- Type of drive marked at end of the handle
- Blade from GEDORE molybdenum-vanadium-Plus tempered steel
PZ | M | Blade length (mm) | Length (mm) | Weight (mm) | Code | No. |
---|---|---|---|---|---|---|
0 | M1,6 - M2 | 60 | 145 | 0.038 | 1612166 | VDE 2160 PZ 0 |
1 | M2 - M3 | 80 | 180 | 0.082 | 1612182 | VDE 2160 PZ 1 |
2 | M3,5 - M5 | 100 | 210 | 0.120 | 1612190 | VDE 2160 PZ 2 |
3 | M5,5 - M7 | 150 | 270 | 0.188 | 1612204 | VDE 2160 PZ 3 |
4 | M8 - M10 | 200 | 320 | 0.270 | 1612212 | VDE 2160 PZ 4 |
VDE 2162 PH
VDE Screwdriver Slim Drive
For cross-head screws PH
- Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
- 3-component handles Power-Grip3 with hanging hole
- Ergonomic handle design enables precise and fatigue-free working
- Positive-fit joint of handle and blade for optimum transmission of force
- Type of drive marked at end of the handle
- Ultra-small blade diameter yet with full mechanical and electrical safety
- No problems in reaching screws deeply embedded in screw shafts
- Blade from GEDORE molybdenum-vanadium-Plus tempered steel
PH | M | Blade length (mm) | Length (mm) | Weight (mm) | Code | No. |
---|---|---|---|---|---|---|
1 | M2 - M3 | 80 | 180 | 0.100 | 2824442 | VDE 2162 PH 1 |
2 | M3,5 - M5 | 100 | 210 | 0.140 | 2824450 | VDE 2162 PH 2 |