V 42 T
VDE Hexagon Allen Key with T-Handle
For in-hex screws

• Individually tested, insulation up to 1000 V
• With Check-Tool insulation
• GEDORE chrome-vanadium steel 59CrV4

VDE 2172
VDE Screwdriver Slim Drive
For slotted head screws

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Ultra-small blade diameter yet with full mechanical and electrical safety
• No problems in reaching screws deeply embedded in screw shafts
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2160 PH
VDE Screwdriver
For cross-head screws PH

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• Blade tip to DIN ISO 8764-1 PH
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2160 PZ
VDE Screwdriver
For cross-head screws Pozi PZ

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• Blade tip to DIN ISO 8764-1 PZ
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2162 PH
VDE Screwdriver Slim Drive
For cross-head screws PH

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Ultra-small blade diameter yet with full mechanical and electrical safety
• No problems in reaching screws deeply embedded in screw shafts
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2162 PZ
VDE Screwdriver Slim Drive
For cross-head screws Pozi PZ

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Ultra-small blade diameter yet with full mechanical and electrical safety
• No problems in reaching screws deeply embedded in screw shafts
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2163 K
VDE Screwdriver
For in-hex screws, with ball end

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Working angle approx. 25° in each direction
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

VDE 2163 TX
VDE Screwdriver
For recessed TORX® head screws

• Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel
• TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA

VDE 2170-2160 PH-077
VDE Screwdriver Set
7Pieces

• Packed in environmentally-friendly cardboard box
• For slotted and cross-head screws PH
• VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade
• 3-component handles Power-Grip3 with hanging hole
• Ergonomic handle design enables precise and fatigue-free working
• Positive-fit joint of handle and blade for optimum transmission of force
• Type of drive marked at end of the handle
• Blade from GEDORE molybdenum-vanadium-Plus tempered steel

4615
Voltage Tester

• For 220-250 Volt AC
• Blade nickel-plated, fully insulated blade conforming to DIN VDE 0680-6
• 4615 3 with metal clip and yellow cap

V 180 Cable Shears

• Cuts cable up to 27 mm, solid material up to 200 mm2
• Individually tested, insulation up to 1000 V

VDE 8094 VDE Cable Shears
With VDE dipped insulation

• For cutting multi-core copper and aluminium cables up to Ø 20 mm
• When using first and final cuts, the diameter increases to Ø 25 mm
• The handle width remains within the range of ergonomic single-hand operation
• First cut: Use the front blade to cut the cable sheath
• Final cut: Place the cable in the back blade and separate the wire(s)
• Cutting edges additionally inductively hardened
• Precision ground for optimum action, new cutting-edge geometry
• Adjustable screw joint with finger protection
• Not suitable for steel wire or hard-drawn copper wire
• Special tool steel, forged, gun-metal finish
• Handles with VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 146
VDE Universal Pliers
7 settings

• Gripping pliers with safety box joint and finger protection
• GEDORE special chrome-vanadium steel
• Handles with VDE dipped insulation up to 1000 V,
• acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 8131 AB
VDE Multiple Pliers
With VDE insulating sleeves, angled pattern

• Particularly tailored to the needs of electricians, in VDE execution with the following functions
• Cable cutter: enables easy cutting of cables up to 5×2.5 mm2 resp. Ø 12 mm
• Stripping blades: stripping possibility for wires 1,5 mm2 and 2,5 mm2
• Crimp profile: crimping of conductor end-sleeves
• Toothed gripping face: special holding capacity when pulling cables and wires during installations
• Angled pliers tip: guarantees gentle work for wrists and gives sight on to the workpiece
• Space-saving in the pocket, only one tool is needed
• Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900

VDE 8250
VDE Heavy Duty Combination Pliers
With VDE dipped insulated

• For heavy continuous use
• Good lever action for easy cutting
• Induction-hardened precision cutting edges, hardness 62 – 64 HRC
• For flat and round material
• To cut all wire types including piano wire, 1.6 mm
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE dipped insulation up to 1000 V,
• acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 8250 H
VDE Heavy Duty Combination Pliers
With VDE insulating sleeves

• For heavy continuous use
• Good lever action for easy cutting
• Induction-hardened precision cutting edges, hardness 62 – 64 HRC
• For flat and round material
• To cut all wire types including piano wire, 1.6 mm
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900

VDE 8314
VDE Side Cutter
With VDE dipped insulated

• With slender head – ideal for confined spaces
• Induction-hardened precision cutting edges, hardness 63 – 65 HRC
• For medium-hard wire, 1.6 mm
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE dipped insulation up to 1000 V,
• Acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 8314-180 H
VDE Side Cutter
With VDE insulating Sleeves

• With slender head – ideal for confined spaces
• Induction-hardened precision cutting edges, hardness 63 – 65 HRC
• For hard wire/piano wire
• Max. cutting capacity Ø 1.6 – 2.0 mm
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900

VDE 8120
VDE Flat Nose Pliers
With VDE dipped insulated

• Long, flat jaws and serrated gripping surfaces
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE dipped insulation up to 1000 V,
• acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 8120 H
VDE Flat Nose Pliers
With VDE insulating sleeves

• Long, flat jaws and serrated gripping surfaces
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900

VDE 8122
VDE Round Nose Pliers
With VDE dipped insulation

• Long, round jaws and serrated gripping surfaces
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE dipped insulation up to 1000 V,
• acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

VDE 8132
VDE Telephone Pliers
With VDE dipped insulation, straight pattern

• Long, flat-round jaws, straight gripping faces, serrated
• Induction-hardened precision cutting edges, hardness 61 – 63 HRC
• GEDORE special hardened and tempered steel, chrome-plated
• Handles with VDE dipped insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation

1101-003 VDE
VDE Tool Set
In i-BOXX® 72, 8 pieces

• VDE basic assortment
• VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, except voltage tester no. 4615
• In GEDORE i-BOXX® 72, with transparent cover for getting an immediate impression
• Dimensions: W 367 x D 316 x H 72 mm

1102-006 VDE
VDE Tool Set
4 pieces

• Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900
• For all usual electric master cabinets incl. multi fitting key
• In GEDORE L-BOXX® Mini, incl. divider set
• Dimensions: W 260 x D 155 x H 63 mm