Wireless Torque Transducer & Controller
Standard: 1.Transducer 2.Motor Cable 3.Switch magnetic
Option: Dongle
Features
- Versatile operation modes for option: 1.Oil pulse tool 2.Impact wrench
3. Clutch wrench 4. Torque wrench 5.Electric Screwdriver 6.Click Torque Wrench - Signal according to 1.Torque 2.Angle
- RF Frequency band: 60 frequency band used with the E-BTM-C Torque Controller.
- Torque Transducer self-monitoring (electric+ transmitting+ torque+ angle+ usage count)
- On & off Reed switch (magnetic on/off) / Off when non transmitting torque 5min up.
- LED signal light [ Two-tone Blue/Orange: Blue Light on: RF ok / Blue- flicker: system
initialize / Orange- flicker: Error]
[Two-tone Red/Green: Red Light on: charging / Green Light on: charge complete] - The over-limit vibration level: the operation cycles, and the over-torque information
Will be recorded for the ease of warranty judgment. - KEMP APP for smart phone or pad, APP on Android system only.
| Torque | 0.5-2500Nm |
|---|---|
| Power | DC3.7V / 650mAh |
| Torque Resolution (Nm) | 0.1% T nom |
| Accuracy (CW) | + 1 % |
| Accuracy(CCW) | + 2 % |
| Static Measured Angle Range | 0°-360° |
| Angle Resolution (Degree) | 0.5° |
| Charger | Type-C5V 0.5A |
| IO(1) | USB Type - C *1 |
| IO(2) Wireless (1) | RF 2.4G transmitting (20M) |
| Storage Temperature (°C) | -10°C – 60°C |
| Operating Humidity | 10… 75%, Non-condensing |
Wireless Torque Controller
KEMP Tools
Standard :Controller 2.Motor Cable 3.Antennax2 4.Filter Regulator+ Lubricator 5.Air inlet coupler
Option:Tri-color warning light 2.Barcode scaner 3.PrinterFeatures
Features
- Versatile tools support:
- Dynamic Tightening: Oil pulse Tools, Shut-off type Clutch, Torque multiplier, Click Torque Wrench
- Static Tightening: Torque wrench, Click Torque Wrench, Torque multiplier
- Multiple control methods: Dynamic Tightening: 1.Torque 2.Track
Static Tightening: 1.Torque 2.Click Torque Monitor 3.Click Torque Track 4.Monitor - Signal 1.Wireless transducer 2.Air pressure mode
- Torque adjustment 1.Deviation value corrected 2.Override value corrected
- Built-in preset parameters and job sequences up for the ease of assembly works
(Suggest Air inlet 90~110psi) - Built-in torque fastening stage & bolting sequence control.
