Combination Pliers
8248 Angled Combination Pliers

• For the toughest of demands
• Optimum utilisation of the power in one’s hands
• No forced positioning of the hand
• Fatigue-free working over a long period made possible
• High-grade GEDORE special hardened and tempered steel for high cutting performance and a long service life
• Induction-hardened precision cutting edges, hardness 63 – 65 HRC
• For all wires including piano wire, 1.6 mm
• Hot-drop forgedJC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8250 Power Combination Pliers

• Acc. to DIN ISO 5746
• For heavy continuous use
• Good lever action for easy cutting
• For flat and round material
• To cut all wire types including piano wire, 1.6 mm
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8313 Side Cutter
For plastic

• Without cutting edge bevel, for flush cutting of plastic parts or similar soft materials
• Black, cutting faces flat-ground, with compression spring for automatic opening
• With blue dipped non-slip handles (TL)

8315 Electricians Side Cutter

• Double-function electricians’ side cutters: for cutting and stripping wire
• Stripping notches for single- and multi-core wire, 1.5 mm2 and 2.5 mm2 conductor cross-section
• Induction-hardened precision cutting edges, hardness 61 – 63 HRC
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles

88314-180 Power Side Cutter
Swedish Pattern

• Convex handle shape for a high force build-up*
• Acc. to DIN ISO 5749
• With slender head – ideal for confined spaces
• Induction-hardened precision cutting edges, hardness 63 – 65 H
• For hard wire/piano wire
• Max. cutting capacity Ø 1.6 – 2.0 mm

8316 Power Side Cutter
American pattern

• Acc. to DIN ISO 5749
• Good lever action for easy cutting
• For hard wire/piano wire
• Max. cutting capacity Ø 1.4 – 2.0 mm
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8370 Lever-Action End Cutting Nipper

• Acc. to DIN ISO 5748
• For hard wire/piano wire – values see table
• Double-lever mechanism for maximum cutting performance
• C65 tool steel, fully forged
• GEDORE blue varnished

8381 Pincer

• Standard heavy-duty pincers
• Acc. to DIN ISO 9243, Form A
• Induction-hardened precision cutting edges, hardness 61 – 63 HRC
• Heads ground, steel-grey, with blue dipped non-slip handles (TL)
• In high-quality tool steel

8110 Flat Nose Pliers
Without cutting edge, serrated

• Acc. to DIN ISO 5745
• Short jaws, serrated gripping faces
• For holding and bending
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8120 Flat Nose Pliers
Without cutting edge, serrated

• Acc. to DIN ISO 5745
• Long jaws, serrated gripping faces
• For holding and bending
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8112Round Nose Pliers
Serrated

• Similar to DIN ISO 5745
• Short jaws, serrated gripping faces
• For gripping and bending
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8122Round Nose Pliers
Serrated

• Acc. to DIN ISO 5745
• Long jaws, serrated gripping faces
• For gripping and bending
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8132 Telephone Pliers
With cutting edge, serrated, straight pattern

• Acc. to DIN ISO 5745
• Long jaws, serrated gripping faces
• For gripping and bending
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8132 AB
Bent Nose Telephone Pliers
With cutting edge, serrated, angled pattern

• Similar to DIN ISO 5745
• Long, flat-round jaws, angled gripping surfaces, serrated
• 45 ° angled tips make gripping round the corner possible Induction-hardened precision cutting edges, hardness 61 – 63 HRC
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8136 Mechanics Pliers
Without wire cutter, straight pattern

• Acc. to DIN ISO 5745
• Flat-round tapered jaws, cross-hatched gripping surfaces
• For holding, gripping and bending
• Fine-tipped nose, for safe work in confined spaces
• GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed
• JC = chrome-plated, with 2-component handles
• TL = steel-grey, with blue dipped non-slip handles

8000 AE 4
Cirlip Pliers for External Retaining Rings
From A

• For safety rings as per DIN 471, DIN 983
• DIN 5254 Form A
• Straight jaws
• Inside-positioned opening spring
• Pliers basic body in GEDORE chrome-vanadium special steel
• Pressed-in tips of highly wear-resistant roller bearing steel
• Twisting-impeding tip geometry
• Screwed joint connection
• Steel-grey with red-dipped anti-slip handles

8000 AE 01- AE 41 & 8000 A OG – A 2G
Cirlip Pliers for External Retaining Rings
From B

• For safety rings as per DIN 471, DIN 983
• DIN 5254 Form B
• 90° angled jaws
• Inside-positioned opening spring
• Pliers basic body in GEDORE chrome-vanadium special steel
• Pressed-in tips of highly wear-resistant roller bearing steel
• Twisting-impeding tip geometry
• Screwed joint connection
• Steel-grey with red-dipped anti-slip handlesFor shafts without groove
• For retaining rings Seeger as well as Benzing
• Similar to DIN 5254 Form A
• A 0G – A 1G = tips angled 30 °
• A 2G = straight tips
• With opening spring and adjusting screw to limit opening
• High degree of assembly reliability, the limit opening rules out any over-tensioning of the smallest of retaining rings
• Forged GEDORE chrome-vanadium special hardened and tempered steel
• Precision machined, oil hardened and annealed
• Black, with red dipped handles

8000 A 01G- A 21G& 8000 A O – A $
Cirlip Pliers for External Retaining Rings
From A

• For shafts without groove
• For retaining rings Seeger as well as Benzing
• Similar to DIN 5254 Form B
• 90 ° angled tips
• With opening spring and adjusting screw to limit opening
• For shafts without groove
• For retaining rings Seeger as well as Benzing
• Similar to DIN 5254 Form B
• 90 ° angled tips
• With opening spring and adjusting screw to limit opening
• For retaining rings as per DIN 471, DIN 983
• DIN 5254 Form A
• Straight tips
• With opening spring
• With clamping protection
• Forged GEDORE chrome-vanadium special hardened and tempered steel
• Precision machined, oil hardened and annealed
• Black, with red dipped handles

8000 J 0- J 4
Cirlip Pliers for Internal Retaining Rings
From C

• Twisting-impeding tip geometry
• Screwed joint connection
• Steel-grey with blue-dipped anti-slip handles
• For safety rings as per DIN 472, DIN 984
• DIN 5256 Form C
• Straight jaws
• Pliers basic body in GEDORE chrome-vanadium special steel
• Pressed-in tips of highly wear-resistant roller bearing steel

8000 JE 01- JE 41
Cirlip Pliers for Internal Retaining Rings
From D

• For safety rings as per DIN 472, DIN 984
• DIN 5256 Form D
• 90° angled jaws
• Pliers basic body in GEDORE chrome-vanadium special steel
• Pressed-in tips of highly wear-resistant roller bearing steel
• Twisting-impeding tip geometry
• Screwed joint connection
• Steel-grey with blue-dipped anti-slip handles

S 8303 JC Pliers Set
3 pieces

• Practical set composition in environmentally-friendly cardboard box
• JC = chrome-plated, with 2-component handles

1101-002 Pliers Set
6 pieces

• Practical set composition in sturdy plastic case
• JC = chrome-plated, with 2-component handles
• In GEDORE i-BOXX® 72 no. 1101 L
• Dimensions: W 367 x D 316 x H 72 mm

S 8024 Set of Circlip Pliers
4 pieces

• Most popular sizes, packed in environmentally-friendly cardboard box
• For automotive use
• Particularly suitable for barely accessible places
• For internal and external circlip rings
• With straight and 45 ° angled tips

1101-001 Set of Circlip Pliers
8 pieces

• Usual type of tool set packed in sturdy plastic case
• Particularly suitable for barely accessible places
• For internal and external circlip rings
• With straight and 90 ° angled tips
• In GEDORE i-BOXX® 72, with transparent cover for getting an immediate impression
• Dimensions: W 367 x D 316 x H 72 mm